Planet Managed network switch Fast Ethernet 10/100 1U Schwarz Netzwerk-Switch 4-Port over VDSL2 Bridge Profile 30aProduktbeschreibung:• Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution • One box design, CO / CPE selectable via DIP Switch • Defines symmetric band plan for the transmission of upstream and downstream signals • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet ?standards • DMT (Discrete Multi-Tone) line coding • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control • Built-in POTS splitter to share voice and data • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POST connection • Voice and data communication can be shared simultaneously based on the existing telephone wire • Four 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent • Hardware IGMP Snooping for Multimedia service • VDSL2 stand-alone transceiver for simple bridge modem application • Advantage of minimum installation time (Simply as Plug-and-Play) • Selectable target profile and target SNR margin • Supports extensive LED indicators for network diagnosis   100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-234 is an Ethernet-over-VDSL2 Bridge with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-234 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 20/4Mbps for 1.4km long range connections.     Implementing with Existing Telephone Copper Wires The VC-234 is also a Long Reach Ethernet (LRE) Bridge providing four RJ-45 Ethernet ports and two RJ-11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VC-234 has built-in POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-234 into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-234 is ideal to be used as an Ethernet extender to an existing Ethernet network.   Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-234 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-234 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.   Easy & Flexible Installation The Ethernet-over-VDSL2 Bridge comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-234 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-234 and a CO mode VC-234 must be setup as one pair of converters to perform the connection.   Providing Superior Upstream and Downstream Transmission Performance The VC-234 also defines symmetric band plan for the transmission of upstream and downstream signals; the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-234 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-234 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.Technische Details:AllgemeinGerätetypRouter - 4-Port-Switch (integriert)GehäusetypDesktopAnschlusstechnikKabelgebundenData Link ProtocolEthernet, Fast EthernetDatenübertragungsrate100 MbpsGröße der MAC-Adresstabelle2000 EinträgeNetzwerk/TransportprotokollTCP/IP, PPPoE, AAL5, DHCP, DNSRouting ProtocolStatisches IP RoutingRemoteverwaltungsprotokollHTTPLeistungsmerkmaleFirewall, DMZ port, NAT Support, PAT Support, Auto-Negotiation, Auto-Uplink (Auto MDI/MDI-X), IP-Adressenfilterung, LAN-to-LAN-Bridging, virtueller Server-Support, DHCP-Server, DNS proxyProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3x, FCC Part 15 AStatusanzeigerStromversorgung, Link OK, 100M-Gerät angeschlossen, Link/AktivitätKommunikationsformenTypDSL-ModemDigital Signaling ProtocolVDSL2Protokolle und SpezifikationenITU G.993.2Max. Datenübertragungsrate100 MbpsErweiterung/KonnektivitätSchnittstellen4 x 10Base-T/100Base-TX - RJ-45 WAN: 1 x VDSL2 - RJ-11 Telefonleitung: 1 x RJ-11StromversorgungStromversorgungsgerätExterner NetzadapterVerschiedenesEnthaltene Kabel1 x Netzwerkkabel 1 x ModemkabelMaße und GewichtBreite15,5 cmTiefe8,6 cmHöhe2,6 cmGewicht368 gUmgebungsbedingungenMin Betriebstemperatur0 °CMax. Betriebstemperatur50 °CZulässige Luftfeuchtigkeit im Betrieb5 - 90% (nicht kondensierend)

Planet Switch managed 24 x 10/100/1000 PoE+ + 4 x Fast Ethernet/Gigabit SFP Desktop an Rack montierbar 440 WProduktbeschreibung:48x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3at/af PoE injector 4x 100/1000BASE-X mini-GBIC/SFP slots Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE Backward compatible with IEEE 802.3af Power over Ethernet Up to 48 ports of IEEE 802.3af/802.3at devices powered Supports PoE power up to 36 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100 meters PoE management - Total PoE power budget control - Per port PoE function enable/disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth Supports VLAN - IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP Supports Spanning Tree Protocol - STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding Supports Link Aggregation - IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Ingress and egress rate limit per port bandwidth control Storm control support - Broadcast/Unknown unicast/Unknown multicast Traffic classification - IEEE 802.1p CoS - TOS/DSCP/IP precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Supports IPv4 IGMP snooping v2, v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Authentication - IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - RADIUS/TACACS+ login user access authentication Access control list - IPv4/IPv6 IP-based ACL - MAC-based ACL MAC security - Static MAC - MAC filtering Port security for source MAC address entries filtering DHCP snooping to filter untrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP source guard prevents IP spoofing attacks DoS attack prevention SSH/SSL IPv4 and IPv6 dual stack management Switch management interface - Web switch management - Telnet command line interface - SNMP v1, v2c and v3 - SSH and SSL secure access User privilege levels control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System maintenance - Firmware upload/download via HTTP/TFTP - Configuration upload/download through web interface - Dual images - Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Cable diagnostics Link Layer Discovery Protocol (LLDP) and LLDP-MED SNMP trap for interface link up and link down notification Event message logging to remote Syslog server Four RMON groups (history, statistics, alarms and events) PLANET smart discovery utility Smart fan with speed control    Cost-effective, High-density PoE Solution Perfect Managed PoE+ Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-48P4S is a cost-optimized, high-density PoE+ Managed Gigabit Ethernet Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 48 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 4 additional Gigabit SFP slots. With a total power budget of up to 440 watts for different kinds of PoE applications, it provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Premium VoIP Networks for Medium- to Large-scale Deployments The GS-4210-48P4S has 48 IEEE 802.3at PoE+ ports, 104Gbps switch fabric and advanced QoS functionality for deploying medium- to large-scale VoIP or wireless networks at a low total cost. One GS-4210-48P4S can power up 48 PoE VoIP phones and delivers HD (high-definition) voice to VoIP network with high priority, resulting in higher quality voice and clearer communication. From now on, customers only need fewer units of the GS-4210-48P4S than before to achieve the goal of cost-effectiveness, thereby saving setup time and human resource.   Built-in Unique PoE Functions for Powered Device Management As it is the managed PoE switch for VoIP, wireless and surveillance networks, the GS-4210-48P4S features the following special PoE management functions: PoE schedule PD alive check Scheduled power recycling PoE usage monitoring   PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-48P4S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    Intelligent Powered Device Alive-Check The GS-4210-48P4S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-48P4S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.    Scheduled Power Recycling The GS-4210-48P4S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.    Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-48P4S features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-48P4S is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-48P4S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up.   Robust Layer 2 Features The GS-4210-48P4S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-48P4S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-48P4S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-48P4S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-48P4S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.    Friendly and Secure Management For efficient management, the GS-4210-48P4S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-48P4S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-48P4S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The four mini-GBIC slots built in the GS-4210-48P4S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-48P4S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.Technische Details:AllgemeinGerätetypSwitch - 48 Anschlüsse - managedGehäusetypDesktop, an Rack montierbar 1UUntertypGigabit EthernetPorts24 x 10/100/1000 (PoE+) + 4 x Fast Ethernet/Gigabit SFPPower Over Ethernet (PoE)PoE+PoE-Budget440 WLeistungSwitching Fabric-Bandbreite: 104 Gbps Durchsatz: 77,38 MppsKapazitätVLAN-Gruppen: 256 VLAN-Unterstützung: 4094Größe der MAC-Adresstabelle16.000 EinträgeJumbo-Rahmenunterstützung10KBRouting ProtocolIGMPv2, IGMPv3, MLDv2, MLDRemoteverwaltungsprotokollSNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSHVerschlüsselungsalgorithmusSSLAuthentifizierungsmethodeRADIUS, TACACS+LeistungsmerkmaleFlusskontrolle, Layer 4 switching, Layer 2 switching, DHCP Support, Power over Ethernet (PoE), BOOTP-Unterstützung, VLAN-Unterstützung, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, Syslog-Unterstützung, Schutz vor DoS-Angriffen, Port-Spiegelung, verwaltbar, Store-and-Forward, MAC-Adressenfilter, Broadcast Storm Control, IPv6-Unterstützung, Halbduplex-Modus, Vollduplex-Modus, Multicast Storm Control, Unicast Storm Control, Firmware aktualisierbar, SNTP-Unterstützung, Spanning Tree Protocol (STP) Support, unterstützt Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree Protocol (MSTP) Support, DHCP-Snooping, Access Control List (ACL) Support, Quality of Service (QoS), RADIUS-Unterstützung, SSH-Unterstützung, Jumbo-Frames-Support, MLD-Snooping, Dynamic ARP Inspection (DAI), Digital Diagnostics, Reset-Taste, Bandbreitensteuerung, IPv4-Unterstützung, LLDP-Support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), Class of Service (CoS), Generic VLAN Registration Protocol (GVRP), TFTP-Client, 6KV ESD Protector, Type of Service (ToS), 12 MB gemeinsam genutzter Puffer, unterstützt DiffServ Code Point (DSCP), IP-Quellwächter, Bridge protocol data unit (BPDU)ProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3atIntegrierte PeripheriegeräteLED PanelStatusanzeigerStromversorgung, System, PoE, Link/AktivitätErweiterung/KonnektivitätSchnittstellen48 x 1000Base-T RJ-45 PoE+ - 36 W 4 x 1000Base-X SFPStromversorgungStromversorgungsgerätInternes NetzteilErforderliche NetzspannungWechselstrom 120/230 V (50/60 Hz)Leistungsaufnahme im Betrieb181 WattVerschiedenesZubehör im LieferumfangGummifüße, 4 Port-Abdeckungen (SFP)RackmontagesatzMitgeliefertProduktzertifizierungenFCC Part 15 AMaße und GewichtBreite44 cmTiefe30 cmHöhe4,45 cmGewicht5,476 kgUmgebungsbedingungenMin Betriebstemperatur0 °CMax. Betriebstemperatur50 °CZulässige Luftfeuchtigkeit im Betrieb5 - 95 % (nicht kondensierend)Min. Lagertemperatur-20 °CMax. Lagertemperatur70 °CZulässige Luftfeuchtigkeit bei Lagerung5 - 95 % (nicht kondensierend)

Planet DIGITUS Professional Patch-Kabel RJ-45 m bis 2 m UTP CAT 6 Kabel Digital/Daten Netzwerk 6 2 m halogenfreiProduktbeschreibung:2x RJ45-Stecker (8P8C)Hauben mit Knickschutz, Zugentlastung und RasthebelschutzLängenbezeichnung auf den HaubenInnenleiter: Kupfer (Cu)2x RJ45-Stecker (8P8C)Hauben mit Knickschutz, Zugentlastung und RasthebelschutzLängenbezeichnung auf den HaubenInnenleiter: Kupfer (Cu)Zukunftsorientierte Standards und High-End Qualität für Ihr Netzwerk.- Mit LSZH-Außenmantel (Low Smoke Zero Halogen) für bestes Brandverhalten und niedrige Rauchemission.- Transparent Rot gefärbter Stecker für eine einfache Identifizierung der Kategorie 6 (250 MHz)- Innenleiter: Kupfer (Cu)- PoE+ kompatibelDie DIGITUS® Kategorie 6 Klasse E Patchkabel werden hergestellt und getestet nach dem ISO/IEC 11801 und DIN EN 50173 CAT 6 Standard. Sie garantieren, dass die Kabelinstallation der ISO & EN Channel Spezifikation entspricht und bieten eine hervorragende Leistung in der DIGITUS® CAT 6 Verkabelung. Die Leistung wurde bis 250 MHz getestet, inklusive Leistungseigenschaften wie beispielsweise dem Nahnebensprechen („NEXT“). Die DIGITUS® Patchkabel wurden speziell entwickelt um allen Ansprüchen in den verschiedenen Anwendungsbereichen in vollem Umfang gerecht zu werden. Jedes Kabel ist mit einer angespritzten Knickschutztülle mit Zugentlastung ausgestattet. Außerdem besitzt die Tülle einen Rasthebelschutz, welcher das Verhaken der Kabel sowie das Abbrechen des Rasthebels vom Stecker verhindert. Eine einfache Identifizierung der Kategorie 6 wird durch die rote Einfärbung der Stecker ermöglicht.Technische Details:AllgemeinTyp des NetzwerkkabelsPatch-Kabel - CAT 6 - IEEE 802.3TechnologieUTP-KabelVerdrahtungsschemaT568BKabelmantelmaterialLow Smoke Zero Halogen (LSZH)American Wire Gauge (AWG)26/7Drähte pro Kabel8 DrähtePaare pro Kabel4 ZweidrahtleitungenBeschichteter SteckerGoldLeistungsmerkmaleHalogenfrei, geformt, ohne Haken, PoE+ Ready, Zugentlastung, minimiertes Near-End Crosstalk (NEXT), Längenanzeige, Knickschutz, Verriegelungsschutz, Polybeutel-VerpackungLänge2 mFarbeSchwarzKonnektivitätAnschlussRJ-45 - männlichStecker (zweites Ende)RJ-45 - männlichVerschiedenesKennzeichnungIEC 60332-1, ISO/IEC 11801, TIA/EIA-568-B, IEC 61034, EN 50173, TIA/EIA 568B - bis zu 250 MHzUmgebungsbedingungenMin Betriebstemperatur-20 °CMax. Betriebstemperatur60 °C

Planet Switch 4 x 10/100 + 1 x 100Base-FX an DIN-Schiene montierbar wandmontierbar GleichstromProduktbeschreibung:4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function 1-port 100Base-FX interface for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-511 1-port 100Base-FX interface for up to 15km (Single-mode fiber 9µm/125µm) on ISW-511S15   Layer 2 Features Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port High performance Store and Forward architecture Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) Backplane (Switching Fabric): 1Gbps Integrated address look-up engine, support 2K absolute MAC addresses 1 Mbit on-chip frame buffer Automatic address learning and address aging CSMA/CD Protocol   Industrial Case / Installation IP-30 metal case / protection DIN rail and wall mount design 12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power Supports EFT protection 6000 VDC for power line Supports 6000 VDC Ethernet ESD protection -10 to 60 degrees C operating temperature      New slim type with more practicability and convenience PLANET has released the ISW-511 / ISW-511S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511S15 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.   Stable Operating Performance under Difficult Environments The ISW-511 / ISW-511S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 / ISW-511S15 can be placed in almost any difficult environment. The ISW-511 / ISW-511S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.   Robust Switch performance The ISW-511 / ISW-511S15 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 / ISW-511S15 for fast and reliable data transfer.   All of the RJ-45 copper interfaces in the ISW-511 / ISW-511S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.Technische Details:AllgemeinGerätetypSwitch - 5 AnschlüsseGehäusetypAn DIN-Schiene montierbar, wandmontierbarUntertypFast EthernetPorts4 x 10/100 + 1 x 100Base-FXOptische Wellenlänge1300 nmMax. Übertragungsabstand2 kmGröße der MAC-Adresstabelle2000 EinträgeLeistungsmerkmaleFlusskontrolle, Store-and-Forward, Halbduplex-Modus, Vollduplex-Modus, Back Pressure SupportProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3xErweiterung/KonnektivitätSchnittstellen4 x 100Base-TX RJ-45 1 x 100Base-FX SC multi-modeStromversorgungErforderliche NetzspannungDC 12 - 48 VLeistungsaufnahme im Betrieb9.1 WattVerschiedenesProduktzertifizierungenUL, cUL, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, FCC Part 15 AMaße und GewichtBreite13,5 cmTiefe9,7 cmHöhe3,2 cmGewicht436 gUmgebungsbedingungenMin Betriebstemperatur-10 °CMax. Betriebstemperatur60 °CZulässige Luftfeuchtigkeit im Betrieb5 - 90%Min. Lagertemperatur-40 °CMax. Lagertemperatur85 °CZulässige Luftfeuchtigkeit bei Lagerung5 - 90% (nicht kondensierend)

Planet 240W Elektrischer Umwandler 48V DC Single Output Industrial DIN Rail 1.2KgProduktbeschreibung:Universal AC input / full range Built in active PFC function Protection: short circuit / overload / over voltage / over temperature Cooling by free air convection For installation on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved LED indicator for power on 100% full load burn-in test Fixed switching frequency at 100KHz    Compact Size with more Practicability and Convenience PLANET has released PWR series for industrial Ethernet devices specially designed for the harsh working environment where sometimes it is hard to find suitable DC voltage power source. The PWR series offered includes DC single output industrial DIN rail power supply units which accept universal 100-240 AC input voltage or DC input and provide 24V / 48V DC power output with various watt values. They are designed in compact size and can be installed on DIN rail TS-35 / 7.5 or 15. It is an ideal and convenient DC power feeding solution for industrial equipment under heavy Industrial environments.   Stable Performance under Difficult Environments The DC Single Output Industrial DIN Rail Power Supply Units provides various models with short circuit/overload/over voltage and over temperature protections for the stable operation of Industrial Ethernet equipment. As they adopt the free air convection cooling system, they are able to operate under the temperature ranging from -20 to 70 degrees C (maximum). Thus, the DC single output industrial DIN rail power supply units can be placed in almost any difficult environments.Technische Details:AllgemeinGerätetypNetzteil - aktive Power Factor Correction (PFC) - DIN-Schienenmontage möglichStromversorgungsgerätEingangsspannungWechselstrom 100-240 VNötige Frequenz50/60 HzAusgangsspannungDC 48 VLeistungskapazität240 WattVerschiedenesBesonderheitenÜberhitzungsschutz, LED-Anzeiger, Überspannungsschutz, Überlastungsschutz, KurzschlussschutzKennzeichnungTUV, UL 60950-1, EN 60950-1, UL 508UmgebungsbedingungenMin Betriebstemperatur-10 °CMax. Betriebstemperatur70 °CZulässige Luftfeuchtigkeit im Betrieb20 - 90%Abmessungen und GewichtBreite10 cmTiefe12,5 cmHöhe12,5 cmGewicht1,2 kg

Die PLANET Switche der Serie GSD/WGSW/GS-4210 wurden für SMB- und SOHO-Netzwerkinfrastrukturen entwickelt. Neben IPV6/IPV4-Management und Layer2/4-Switching-Funktionen verfügt der Switch über eine lüfterlose Green-Technologie.

Planet Industrial 2-port 10/100/1000T 802.3at PoE+ Injector Switch 1 Gbps TCP/IP Power over Ethernet Kabellos RJ-45 Slim-GehäuseProduktbeschreibung:4x 10/100/1000BASE-T RJ45 interfaces 2-port Data + Power output 2-port Data input 1 terminal block for master and slave power input with reverse polarity protection Power Range: 48 ~ 56V DC redundant power (IPOE-260) Power Range: 12 ~ 56V DC redundant power (IPOE-260-12V) LED indicators for power LED and PoE-in-use   PoE: Gigabit Power over Ethernet Plus mid-span PSE IEEE 802.3at PoE+ compliant  IEEE 802.3at splitter devices compatible Supports PoE Power up to 36 watts for PoE port Provides DC 54V power over RJ45 Ethernet cable to device  Auto-detection of PoE IEEE 802.3af/at devices  Remote power feeding up to 100m  Industrial Case and Installation: IP30 slim metal case DIN-rail, wall-mount or side wall-mount design Supports 6KV DC Ethernet ESD protection -40 to 75 degrees C operating temperature Advanced 802.3at PoE+ Network Solution:PLANET IPOE-260 2-Port, Mid-span Industrial IEEE 802.3at Power over Ethernet Plus Injector Hub series provides a maximum of up to 36 watts of power output over Ethernet cables. It frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall or ceiling, and most of all, it reduces installation time. Technische Details:AllgemeinesTypSonstiges NetzwerkgerätDiverse Produktfeatures (Wasserdicht, Lautstärkeregler, ...)Slim-GehäuseSchnittstellen/KonnektivitätPortzahl2-PortNetzwerkNetzwerkprotokolleTCP/IPNetzwerkstandardsPower over EthernetNetzwerkportsRJ-45Technische DatenÜbertragungsrate1 GbpsKabellos-TechnologieKabellos

Planet 10/100/1000T + 2-Port Managed L2/L4 Gigabit Ethernet 10/100/1000 Vollduplex Rack-Einbau 1U 8-Port + 100/1000X SFP SwitchProduktbeschreibung:8x 10/100/1000BASE-T Gigabit RJ45 copper ports 2x 100/1000BASE-X SFP ports RJ45 console interface for switch basic management and setup   Layer 2 Features: Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN (Protected port) Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding  Supports Link Aggregation: IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (static trunk) Maximum 1 trunk group, up to 2 ports per trunk group   Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching)  Quality of Service: Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies  Multicast: Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering  Security: Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers RADIUS/TACACS+ login user access authentication Access Control List IPv4/IPv6 IP-based ACL/ACE MAC-based ACL/ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention  Management: IPv4 and IPv6 dual stack management Switch Management Interface Web switch management  Console/Telnet Command Line Interface  SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload/download via HTTP/TFTP Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Cable Diagnostics Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED SNMP trap for interface Link Up and Link Down notification Event message logging to remote Syslog server Four RMON groups (history, statistics, alarms, and events)  PLANET NMS System and Smart Discovery Utility for deployment management  A Perfect Managed Edge Switch with Advanced L2/L4 Switching and Security:PLANET GS-4210-8T2S is an 8-Port Gigabit Managed Ethernet Switch with SFP interfaces specially designed to build a full Gigabit backbone to reliably transmit and forward data to remote network through fiber optic. It provides 8 10/100/1000BASE-T copper ports and 2 extra 100/1000BASE-X SFP fiber optic interfaces with built-in power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GS-4210-8T2S provides user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching functions. It is the best investment for businesses and SOHOs expanding or upgrading their network infrastructures.  Cybersecurity Network Solution to Minimize Security Risks:The GS-4210-8T2S supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, ARP Inspection Protection, 802.1x port-based and network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications:The GS-4210-8T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.  Environmentally-friendly, Fanless Design for Silent Operation:The GS-4210-8T2S with a desktop-sized metal housing is designed to operate quietly and effectively as it is fanless and comes with optimal power output capability. Thus, the GS-4210-8T2S can be deployed in any environment without affecting its performance. IPv6/IPv4 Dual Stack Management:Supporting both IPv6 and IPv4 protocols, the GS-4210-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.  Robust Layer 2 Features:The GS-4210-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-8T2S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well.  Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control:The GS-4210-8T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security:The GS-4210-8T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Friendly and Secure Management:For efficient management, the GS-4210-8T2S is equipped with Command line, Web and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-8T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and the console port.? By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software. Moreover, the GS-4210-8T2S offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexible Long-distance Extension Solution:The two mini-GBIC ports built in the GS-4210-8T2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and to 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism:The GS-4210-8T2S  supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Technische Details:AllgemeinesTypSwitchDiverse Produktfeatures (Wasserdicht, Lautstärkeregler, ...)ManagedBauformRack-ModulSchnittstellen/KonnektivitätPortzahl8-PortÜbertragungsmodusVoll-DuplexNetzwerkNetzwerkprotokolleIPv6; SNMPNetzwerkstandardsEthernetNetzwerkportsRJ-45Technische DatenMediumKupferdraht; Glasfaser (LWL)Übertragungsrate0,1 GbpsRack Höheneinheiten1 HE

Der PLANET IGS-5225-8P2T2S Switch wurde für effiziente Netzwerklösungen mit hoher Leistungsfähigkeit entwickelt. Er verfügt über ein PoE+-Leistungsbudget von 240 W und unterstützt bis zu 8 Ports mit 10/100/1000 Mbit/s, die für die Stromversorgung von Geräten in einem kabelgebundenen Netzwerk geeignet sind und gleichzeitig eine zuverlässige Datenübertragung gewährleisten. Seine mehrschichtige Architektur ermöglicht Funktionen wie VLAN-Unterstützung, Zugriffskontrolllisten (ACL) und Quality of Service (QoS) und gewährleistet so die Datenverwaltung in verschiedenen Umgebungen.Dieser Switch arbeitet unter Bedingungen von -40°C bis 75°C und ist mit redundanten Stromversorgungen ausgestattet, um Zuverlässigkeit und Ausdauer zu gewährleisten. Das Gerät unterstützt umfangreiche Verwaltungsprotokolle wie SNMP, Telnet und HTTP und ermöglicht so eine flexible Verwaltung. Das Metallgehäuse und die Schutzart IP30 sorgen für die nötige Widerstandsfähigkeit in rauen Umgebungen und machen den IGS-5225-8P2T2S zu einer praktischen Wahl für Unternehmen, die eine zuverlässige und effiziente Netzwerkeinrichtung anstreben.Robuste Power-over-Ethernet-UnterstützungMit einem Leistungsbudget von 240 W versorgt der Switch die angeschlossenen Geräte effizient mit Strom, was die Installation vereinfacht und den Bedarf an separaten Netzteilen reduziert.Breiter BetriebstemperaturbereichDieser Switch arbeitet effektiv bei Temperaturen von -40°C bis 75°C und eignet sich somit für industrielle und Außeninstallationen.Erweiterte NetzwerkverwaltungsfunktionenUnterstützt mehrere Verwaltungsprotokolle wie SNMP, Telnet und HTTP, was eine einfache Fernüberwachung und -verwaltung des Netzwerks ermöglicht.Langlebiges und zuverlässiges DesignMit seinem Metallgehäuse und der IP30-Zertifizierung ist dieser Switch so konzipiert, dass er anspruchsvollen Umgebungen standhält und seine Leistung beibehält.Umfassende VLAN- und Priority-Queuing-UnterstützungDer Switch bietet VLAN-Unterstützung und Quality-of-Service-Funktionen, die sicherstellen, dass der Datenverkehr entsprechend den Anforderungen der verschiedenen Anwendungen priorisiert wird.

Planet Industrial 5-Port GE LoRaWAN WLAN Gateway Blau Metall DIN-Schienen-/Wandmontage CE FCC * IPSec/Remote Server Net-to-Net Host-to-Net * GRE * PPTP * L2TP * SSL... RJ-45 Wireless with 10/100/1000TProduktbeschreibung:Lieferzeit in Werktagen: 20Technische Details:AllgemeinesTypRouterSchnittstellen/KonnektivitätPortzahl5-PortNetzwerkNetzwerkprotokolleIPSec; L2TP; PPTPNetzwerkstandardsWLANNetzwerkportsRJ-45Technische DatenMediumWLANÜbertragungsrate0,1 GbpsKabellos-TechnologieKabellosSonstiges / ZubehörKennzeichnungCE; FCC

Planet MEAN WELL NDR-120-48 Stromversorgung DIN-Schienenmontage möglich Wechselstrom 100-240 V 120 WattProduktbeschreibung:Universal AC input / full range AC input range selectable by switch Protection: short circuit / overload / over voltage / over temperature Cooling by free air convection For installation on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved LED indicator for power on 100% full load burn-in test Fixed switching frequency at 55KHz    Compact Size with more Practicability and Convenience PLANET has released PWR series for industrial Ethernet devices specially designed for the harsh working environment where sometimes it is hard to find suitable DC voltage power source. The PWR series offered includes DC single output industrial DIN rail power supply units which accept universal 100-240 AC input voltage or DC input and provide 24V / 48V DC power output with various watt values. They are designed in compact size and can be installed on DIN rail TS-35 / 7.5 or 15. It is an ideal and convenient DC power feeding solution for industrial equipment under heavy Industrial environments.   Stable Performance under Difficult Environments The DC Single Output Industrial DIN Rail Power Supply Units provides various models with short circuit/overload/over voltage and over temperature protections for the stable operation of Industrial Ethernet equipment. As they adopt the free air convection cooling system, they are able to operate under the temperature ranging from -20 to 70 degrees C (maximum). Thus, the DC single output industrial DIN rail power supply units can be placed in almost any difficult environments.Technische Details:AllgemeinGerätetypNetzteil - DIN-Schienenmontage möglichStromversorgungsgerätEingangsspannungWechselstrom 100-240 VNötige Frequenz50/60 HzAusgangsspannungDC 48 VLeistungskapazität120 WattVerschiedenesBesonderheitenÜberhitzungsschutz, Überspannungsschutz, Überlastungsschutz, KurzschlussschutzKennzeichnungFCC, EN 60950-1, UL 508, EN 60204-1UmgebungsbedingungenMin Betriebstemperatur-20 °CMax. Betriebstemperatur70 °CZulässige Luftfeuchtigkeit im Betrieb20 - 95%Abmessungen und GewichtBreite4 cmTiefe12,5 cmHöhe11,3 cmGewicht600 g

Planet Medienkonverter Ethernet Fast Gigabit 10Base-T 1000Base-LX 1000Base-SX 100Base-TX 1000Base-T SFP mini-GBIC / RJ-45Produktbeschreibung:1x 10/100/1000BASE-T RJ45 with IEEE 802.3af /802.3at PoE+ Injector 1x 1000BASE-SX/LX SC Fiber interface (IGTP-802T/IGTP-802TS) 1x SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode (IGTP-805AT)  Power over Ethernet: Complies with IEEE 802.3at/af PoE Plus end-span PSE 1 IEEE 802.3at/af device powered Supports PoE Power up to 30.8 watts for PoE port Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation Remote power feeding up to 100m IEEE 802.3at/af splitter devices compatible  Layer 2 Features: Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode on RJ45 port Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)  Hardware: LED Indicators System: Power 1, Power 2 and Fault LED       Fiber port: LNK/ACT 10/100/1000Base-T port: LNK/ACT, 1000, PoE-in-use DIP switch: LFP (Link Fault Passthrough) mode selection  Industrial Case and Installation: IP30 metal case  DIN-rail or wall-mount design 12 ~ 48V DC/24V AC redundant power with polarity reverse protect function and connective removable terminal block for master and slave power Supports 6000 VDC Ethernet ESD protection -40 to 75 degrees C operating temperature PLANET IGTP-80xT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3at Power over Ethernet Plus (PoE+) injector to deliver both up to 30 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGTP-80xT supports 12~48V DC power input or 24V AC power input for power redundancy and operational flexibility.  Being able to operate under the temperature ranging from -40 to 75 degrees C and with an IP30 rugged case, the IGTP-80xT can be placed in almost any difficult environment. Fiber-optic Link Capability Extends the Range of Network Deployment:The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGTP-80xT is integrated with fiber interface for farther distance applications.  The IGTP-80xT’s fiber connector type is as follows: IGTP-802T: Fiber SC connector supporting 1000BASE-SX multi-mode and transmission distance up to 550m. IGTP-802TS: Fiber SC connector supporting 1000BASE-LX single-mode and transmission distance up to 10km. IGTP-805AT: SFP slot supporting 100BASE-FX/1000BASE-X multi/single mode SFP module and transmission distance up to 120km (Varying on SFP module). With the long fiber distance support, the IGTP-80xT still sustains the transmission performance as high as 1000Mbps. It works in the high-performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x flow control and the LFP (Link Fault Passthrough) function in the DIP switch design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power usage. Plug and Play High Power Sourcing Solution:Complying with the IEEE 802.3at Power over Ethernet Plus technology, the IGTP-80xT provides up to 30 watts of PoE output power, doubling that of the earlier 802.3af. It is also backward compatible with 802.3af PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one unit, the IGTP-80xT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Convenient and Reliable Power System:To facilitate the 802.3at power PoE+ usage with the commonly-used 12~48V DC power input or 24V AC power input for transportation and industrial-level applications, the IGTP-80xT adopts the 12~48V DC to 52V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.  Environmentally Hardened Design for Industrial PoE Networks:The IGTP-80xT is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. The IGTP-80xT is packaged in a compact, IP30 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. With IP30 rugged case protection and PoE design, the IGTP-80xT is ideal for service providers, campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location.Technische Details:AllgemeinGerätetypMedienkonverterFormfaktorExternNetzwerkAnschlusstechnikKabelgebundenVerdrahtungstyp10Base-T, 1000Base-LX, 1000Base-SX, 100Base-TX, 1000Base-TData Link Protocol10Mb LAN, 100Mb LAN, 1GbEDatenübertragungsrate1 GbpsStatusanzeigerStromversorgung, PoE, Link/AktivitätLeistungsmerkmaleFlusskontrolle, Auto-Negotiation, Auto-Uplink (Auto MDI/MDI-X), Halbduplex-Modus, Vollduplex-Modus, geeignet für Wandmontage, an DIN-Schiene montierbar, 6KV ESD Protector, 6KV EFT SchutzProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.3atErweiterung/KonnektivitätSchnittstellen1 x Ethernet 1000Base-LX/1000Base-SX - SFP 1 x Ethernet 10Base-T/100Base-TX/1000Base-T (PoE+) - RJ-45VerschiedenesKennzeichnungIEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, FCC Part 15 A, IP30StromversorgungPower Over Ethernet (PoE)PoE+Erforderliche NetzspannungDC 24/48 VLeistungsaufnahme im Betrieb33 WattAbmessungen und GewichtBreite13,5 cmTiefe8,7 cmHöhe3,2 cmGewicht500 gUmgebungsbedingungenMin Betriebstemperatur-30 °CMax. Betriebstemperatur75 °CZulässige Luftfeuchtigkeit im Betrieb5 - 90% (nicht kondensierend)

Der PLANET IGS-510TF ist ein industrietauglicher Gigabit-Ethernet-Switch mit vier 10/100/1000BASE-T-Kupfer-Ports und einem 100/1000BASE-X SFP-Glasfaser-Port in einem robusten, kompakten Gehäuse der Schutzklasse IP30. Der IGS-510TF kann in einem Temperaturbereich von -40 bis 75 Grad Celsius betrieben werden und verfügt über ein weitreichendes redundantes Stromversorgungssystem. Er bietet eine zuverlässige, stabile und kontinuierliche Datenübertragung über große Entfernungen und kann in jeder rauen Umgebung installiert werden, ohne dass dabei Platzprobleme auftreten.Glasfaserverbindung erweitert die Reichweite der NetzwerkimplementierungDie maximale Entfernung zwischen zwei IP-Geräten über Ethernet-UTP-Kabel beträgt 100 Meter. Um den Einsatzbereich von IP-Geräten flexibel zu erweitern, kann der SFP-Steckplatz des IGS-510TF, der 100BASE-FX/1000BASE-X, SFP-Module und mehr unterstützt, eine Übertragungsstrecke von bis zu 120 km erreichen. Somit wird der Aufbau einer Netzwerklösung für FTTH (Fiber to the Home), FTTC (Fiber to the Curb) für ISPs oder FTTB (Fiber to the Building) für Unternehmen für die Benutzer sehr einfach, wenn eine Langstreckenübertragung verwendet wird. Der IGS-510TF kann extrem große Datenmengen in einer sicheren Topologie verarbeiten, die mit einem Metro-Switch, Backbone oder Hochleistungsserver verbunden ist.Klein aber ohoDer IGS-510TF wurde speziell mit langlebigen Komponenten und einem robusten Gehäuse für den zuverlässigen Betrieb in elektrisch rauen und klimatisch anspruchsvollen Umgebungen, wie z. B. in Fabrikhallen oder Verkehrsleitzentralen, entwickelt. Mit einem weiten Betriebstemperaturbereich von -40 bis 75 Grad Celsius ist der IGS-510TF ideal für Service Provider, Universitäten und öffentliche Bereiche, um drahtlose Access Points, IP-Kameras oder IP-Telefone an beliebigen Orten einfach und effizient zu installieren.Zweifacher Stromeingang für ein hochverfügbares NetzwerksystemDer IGS-510TF verfügt über ein leistungsstarkes duales Stromeingangssystem mit weitreichenden Spannungen, das in das Automatisierungsnetzwerk des Kunden integriert werden kann, um die Zuverlässigkeit und Betriebszeit des Systems zu verbessern.Geringer Stromverbrauch für umweltfreundliche NetzwerkeDer IGS-510TF nutzt die fortschrittliche Green-Networking-Technologie und spart dadurch Strom bei der Kabellänge sowie beim Link-up und Link-down. Dank dieser Funktionen verbraucht das IGS-510TF im Volllastbetrieb nur sehr wenig Strom, was zu einer effektiven Energieeinsparung beiträgt und gleichzeitig eine hohe Leistung aufrechterhält. Mit dem Auto Power Saving und dem IEEE 802.3az Energy Efficient Ethernet (EEE)-Protokoll kann der IGS-510TF den Status der Kabelverbindung und den Netzwerkverkehr automatisch erkennen und so den Stromverbrauch entsprechend anpassen. So kann der Switch weniger Strom verbrauchen, wenn er weniger aktiv ist.Robuster SchutzDer IGS-510TF bietet eine Kontaktentladung von +/-6KV DC und eine Luftentladung von +/-8KV DC für den Ethernet-ESD-Schutz. Außerdem unterstützt er eine Überspannungsfestigkeit von +/-6KV, um die Produktstabilität zu verbessern und die Netzwerke der Benutzer vor verheerenden ESD-Angriffen zu schützen und sicherzustellen, dass der Betriebsfluss nicht schwankt.Flexible und einfache Installation bei begrenztem PlatzangebotDer kompakte IGS-510TF wurde speziell für die Installation in einer engen Umgebung, z. B. in einem Wandgehäuse, entwickelt. Er kann fest an der Wand oder auf einer DIN-Schiene installiert werden und ist somit an jedem Ort mit begrenztem Platzangebot flexibel und einfach einsetzbar.

Planet Digitus CAT 6EA Keystone JACK 6A Modul geschirmt 500 MHz gemTechnische Details:AllgemeinesTypNetzwerk Service & Support

Planet Layer 3 8-Port 2.5 GBASE-T+ 2-Port 10 Gbps GBASE-T +Produktbeschreibung:Der PLANET MGS-6311-10T2X bietet zuverlässige und effiziente Netzwerkleistung, die auf verschiedene Geschäftsumgebungen zugeschnitten ist. Mit einer Kapazität von 8.000 Routing-Tabellen und 6.000 IP-Schnittstellen stellt er sicher, dass die Netzwerkanforderungen ohne Leistungseinbußen erfüllt werden. Dank seiner robusten Switching-Fabric-Bandbreite von 120 Gbit/s und fortschrittlichen Layer-3-Switching-Funktionen ist dieses Modell für hohen Datenverkehr ausgelegt und gewährleistet gleichzeitig Geschwindigkeit und Stabilität.Der MGS-6311-10T2X ist auf Vielseitigkeit ausgelegt und unterstützt eine Vielzahl von Protokollen und Standards, darunter IPv4 und IPv6, VLAN und Multicast. Sein Betriebstemperaturbereich von 0 °C bis 50 °C in Verbindung mit leistungsstarken Verwaltungsfunktionen wie SSH und SNMP erhöht seine Zuverlässigkeit unter verschiedenen Betriebsbedingungen. Darüber hinaus ist dieser Switch mit Überspannungsschutz und verschiedenen Fernverwaltungsprotokollen eine zuverlässige Wahl für Unternehmen und kleine Netzwerke, die Leistung und Verwaltungsfunktionen benötigen.Technische Details:AllgemeinGerätetypSwitch - 12 Anschlüsse - L3 - managedGehäusetypAn Rack montierbar 1UUntertyp10 Gigabit EthernetPorts8 x 10/100/1000/2.5G + 2 x 10 Gigabit Ethernet + 2 x 10 Gigabit SFP+LeistungSwitching-Durchsatz: 89.28 Mpps Switching Fabric-Bandbreite: 120 Gbit/s Share Data-Puffer: 12 MBKapazitätARP-Tabelle: 8000 Routing-Tabellen: 6000 IP-Schnittstellen: 1024Größe der MAC-Adresstabelle16.000 EinträgeJumbo-Rahmenunterstützung12KBRouting ProtocolIGMP, IGMPv2, IGMPv3, MLD, MLDv2RemoteverwaltungsprotokollTelnet, SNMP 1, SNMP 2c, SNMP 3, SSH-2, TLS 1.2, RMON 1, RMON 2, RMON 3, RMON 9AuthentifizierungsmethodeSecure Shell (SSH)LeistungsmerkmaleStatisches Routing, RIP, OSPF, Redundant Ring Technology, Multicast-Modus, Diagnosefunktion, DDM, IPv4-Unterstützung, IPv6-Unterstützung, VLAN-Unterstützung, Flusskontrolle, Vollduplex-Modus, Halbduplex-Modus, Store-and-Forward-Technologie, Broadcast Storm Control, Loopback-Erkennung, Tag-basierte VLANs, GVRP, MAC based VLAN, IP Subnet-basierter VLANs Support, Link Aggregation, STP Support, RSTP, MSTP Support, BPDU Guard, Root Guard, Port-Spiegelung, ERPS, Verkehrsklassifizierung, CoS, ToS, WRR, MVR, RADIUS-Unterstützung, TACACS+ support, Unterstützung von ACL, DHCP-Snooping, ARP-Inspektion, IP-Quellwächter, DAI, BOOTP-Unterstützung, DHCP Support, TFTP-Client, Firmware aktualisierbar, SNTP-Unterstützung, sFlow, ULPP, ULSM Protocol, LLDP, LLDP-MED, Automatische Aushandlung, MIPS 800 MHz processor, 6KV ESD Protector (Kontaktentladung), 8KV ESD Protector (Luftspaltentladung), Überspannungsschutz, ARP-Unterstützung, ICMP, Bandbreitensteuerung, Port-Deaktivierung, PVEProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3bz, IEEE 802.3an, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1p, IEEE 802.1xErweiterung/KonnektivitätSchnittstellen8 x 10/100/1000/2.5G RJ-45 2 x 10 GBase-T RJ-45 2 x 10 GBase-SR/LR SFP+ 1 x Konsole RJ-45StromversorgungStromversorgungsgerätInternes NetzteilErforderliche NetzspannungWechselstrom 100-240 V (50/60 Hz)Leistungsaufnahme im Betrieb26.6 WattVerschiedenesProduktzertifizierungenRFC1213, RFC1215, RFC1271, RFC1354, RFC1493, RFC1643, RFC1907, RFC2011, RFC2012, RFC2013, RFC2096, RFC2233, RFC2452, RFC2454, RFC2465, RFC2466, RFC2573, RFC2574, RFC2674, FCC Part 15 A, RFC768 UDP, RFC793 TCP, RFC783, RFC791 IP, RFC792, RFC1112, RFC3376, RFC2236, RFC2710, RFC3810, RFC2328, RFC1058, ITU-T G.8032Maße und GewichtBreite33 cmTiefe23 cmHöhe4,36 cmGewicht1,953 kgUmgebungsbedingungenMin Betriebstemperatur0 °CMax. Betriebstemperatur50 °CZulässige Luftfeuchtigkeit im Betrieb5 - 90% RH (non-condensing)Min. Lagertemperatur-10 °CMax. Lagertemperatur70 °CZulässige Luftfeuchtigkeit bei Lagerung5 - 90% RH (non-condensing)

Planet Unmanaged Fast Ethernet 10/100 Vollduplex Power over PoE 4-Port 10/100TX 802.3af/at + 2-Port Desktop Switch 60 WattsProduktbeschreibung:Planet FSD-604HP - Unmanaged - Fast Ethernet (10/100) - Vollduplex - Power over Ethernet (PoE)Technische Details:AllgemeinesTypSwitchDiverse Produktfeatures (Wasserdicht, Lautstärkeregler, ...)UnmanagedSchnittstellen/KonnektivitätPortzahl4-PortÜbertragungsmodusDuplex; Voll-DuplexNetzwerkNetzwerkprotokolleDHCPNetzwerkstandardsEthernet; Power over EthernetNetzwerkportsRJ-45Technische DatenÜbertragungsrate0,1 GbpsNetzwerk/Telefon-ZusatzfunktionenMDI Port-Erkennung

Planet 1-P 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter 10,1 Gbps 1-Port RJ-11 RJ-45 3 HEProduktbeschreibung:1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE Injector 1 RJ11, connector for xDSL port with VDSL2 or ADSL2+ connection  Power over Ethernet: Complies with IEEE 802.3at/af PoE Plus end-span PSE Supports PoE power up to 30.8 watts per PoE port Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation Remote power feeding up to 100m IEEE 802.3at/af splitter devices compatible  VDSL2 Features: VDSL2 stand-alone transceiver for simple bridge modem application Cost-effective bridge function to connect two Ethernet LANs Point-to-multipoint application: Compatible with PLANET and third-party VDSL2 IP DSLAM for last-mile solution Point-to-point application: LAN to LAN extension over phone wire Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode) Voice and data communication can be shared simultaneously based on the existing telephone wire with distance up to 1.4km ITU-T G.993.2 VDSL2 standard ITU-T G.993.5 G.Vectoring and G.INP DMT-based coding technology  CO/CPE mode selectable via DIP switch Selectable target band plan (symmetric and asymmetric) and SNR margin Supports IEEE 802.1Q VLAN tag transparency Hardware and Installation: Compact size, wall-mountable design; ideal solution for space-limited locations Advantage of minimum installation time (Simply by Plug and Play) Metal case, good for heat sinking Supports extensive LED indicators for network diagnosis Additional POTS splitter to share voice and data Supports 6KV DC Ethernet ESD protection PoE Plus High Performance Gigabit Ethernet over Phone Wire Solution: The VC-231GP, a PLANET Long Reach Ethernet (LRE) solution, is a Single-port Gigabit Ethernet-over-VDSL2 Converter with PoE injector function that is installed at a remote location connecting and injecting power to a PoE IP camera, PoE wireless AP, or PoE IP VoIP phone/door phone. It is integrated with three advanced technologies: VDSL2/ADSL2+ Digital Subscriber Line technologies Gigabit Ethernet IEEE 802.3at Power over Ethernet Plus  The VC-231GP works with PLANET VDSL2 converters or multiple-channel VDSL2 switches to be able to simultaneously transmit Ethernet data over a distance of up to 1.4km (4,593ft) over phone wire. The VC-231GP forwards the Ethernet data and provides a maximum of 30-watt power output over an additional 100m UTP cable to a remote IP device complied with 802.3af/at PoE PD (powered device) for network deployment. Users have the ability to grow the structure of the current networks simply with even more flexibility. IEEE 802.3at Power over Ethernet Plus: The PoE in-line power following the IEEE 802.3at Power over Ethernet Plus standard makes the VC-231GP able to deliver Gigabit speed Ethernet data and up to 30 watts of power to remote PoE PDs over one Cat.5E/6 Ethernet cable. The VC-231GP provides more flexibility in power requirements for all kinds of PDs at affordable installation costs. 150/150Mbps Downstream/Upstream High Performance Gigabit Ethernet over Phone Wire: Via the latest VDSL2 technology, the VC-231GP offers selectable asymmetric/symmetric band profile capability. It works well with a pervasive telephone line network with a symmetric data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 21/11Mbps over a long distance of 1.4km. PLANET Gigabit Ethernet over VDSL2 series offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.  Versatile, Flexible and Easy Installation: PLANET Gigabit Ethernet-over-VDSL2 converters come with a plug-and-play design. The VC-231GP offers two operation modes, CPE and CO, for application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, the VC-231GP in the CPE mode and  the VC-231G or VC-234G in the CO mode must be set up as one pair of converters to perform the connection. It gives administrators the ability to reply a fresh local Intranet in various locations by utilizing the original network structure without additional costs. Stable and Reliable DSL Data Connection: With the integrated support for the ITU-T’s new G.993.5 Vectoring technology, the VC-231GP works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure. Implementing with Existing Telephone System: Use the additional splitter from the package of the VC-231GP to share the existing phone line with POTS, thus replacing the existing copper wiring is not necessary. Just plug the VC-231GP with the additional splitter into the existing RJ11 telephone jack and a high-performance VDSL2 network can be connected. It is ideal for use as an Ethernet extender to an existing Ethernet network.  ADSL2+ Fallback: For those ISPs that still provide ADSL broadband service, the VC-231GP can support transmission rates up to 24Mbps downstream and 1Mbps upstream with the ADSL2+ technology. The VC-231GP establishes a connection with ISP and can be also directly switched over to VDSL2 after the ISP network upgrade.Technische Details:AllgemeinGerätetypMedienkonverterFormfaktorGeeignet für WandmontageNetzwerkAnschlusstechnikKabelgebundenVerdrahtungstyp10Base-T, 100Base-TX, 1000Base-T, VDSL2Data Link Protocol10Mb LAN, 100Mb LAN, 1GbE, Ethernet over VDSL2Größe der MAC-Adresstabelle2000 EinträgeMaximaler Übertragungsbereich1.4 kmStatusanzeigerStromversorgung, Link/Aktivität, VDSLLeistungsmerkmaleAuto-Negotiation, Auto-Uplink (Auto MDI/MDI-X), Store-and-Forward, Halbduplex-Modus, Vollduplex-Modus, an DIN-Schiene montierbar, MetallgehäuseProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3atErweiterung/KonnektivitätSchnittstellen1 x Ethernet 10Base-T/100Base-TX/1000Base-T (PoE+) - RJ-45 - 30 W 1 x VDSL2 - RJ-11StromversorgungPower Over Ethernet (PoE)PoE+Abmessungen und GewichtBreite9,7 cmTiefe7 cmHöhe2,6 cmGewicht206 gUmgebungsbedingungenMin Betriebstemperatur0 °CMax. Betriebstemperatur50 °CZulässige Luftfeuchtigkeit im Betrieb5 - 95%

Der PLANET IGS-1020PTF ist ein industrietauglicher Unmanaged Gigabit Ethernet PoE+ Switch auf DIN-Schiene mit acht 10/100/1000BASE-T Ports mit IEEE 802.3at PoE+ und zwei 100/1000BASE-X Glasfaserschnittstellen für Uplink-Verbindungen.Der IGS-1020PTF ist mit einem redundanten Stromversorgungssystem ausgestattet und kann in jeder gehärteten Umgebung zuverlässig, stabil und leise arbeiten, ohne seine Leistung zu beeinträchtigen. Er bietet ein Gesamtleistungsbudget von bis zu 240 Watt für verschiedene Arten von PoE-Anwendungen und eine Betriebstemperatur von -40 bis 75 Grad Celsius in einem robusten IP30-Metallgehäuse.Zweifacher Stromeingang für ein hochverfügbares NetzwerksystemDer IGS-1020PTF verfügt über ein leistungsfähiges duales Stromversorgungssystem mit einem breiten Spannungsbereich, das in das Automatisierungsnetzwerk des Kunden integriert ist, um die Zuverlässigkeit und Betriebszeit des Systems zu erhöhen. Wenn die Stromversorgung 1 ausfällt, wird die Hardware-Failover-Funktion automatisch aktiviert, um das IGS-1020PTF alternativ über die Stromversorgung 2 zu versorgen, ohne dass es zu Betriebsverlusten kommt.802.3at PoE+ Stromversorgung und Erweiterung der Ethernet-DatenübertragungDas IGS-1020PTF verfügt über einen integrierten DIP-Schalter, der die Betriebsarten \"Standard\" und \"Extend\" ermöglicht. In der Betriebsart \"Standard\" arbeitet das IGS-1020PTF als normaler IEEE 802.3at PoE+ Switch. Im \"Extend\"-Betriebsmodus arbeitet der IGS-1020PTF auf einer Pro-Port-Basis mit 10Mbps-Vollduplex-Betrieb und kann 20~25 Watt PoE-Leistungsabgabe über eine Entfernung von bis zu 250 Metern unterstützen, wodurch die 100-Meter-Grenze für Ethernet-UTP-Kabel überwunden wird.Glasfaserverbindung für flexible EntfernungserweiterungDie beiden zusätzlichen Mini-GBIC-Steckplätze des IGS-1020PTF unterstützen die automatische SFP-Erkennung und die doppelte Geschwindigkeit, da er über 100BASE-FX- und 1000BASE-SX/LX-SFP-Glasfasermodule (Small Form-Factor Pluggable) verfügt, d. h. der Administrator kann den geeigneten SFP-Transceiver je nach der erforderlichen Übertragungsentfernung oder -geschwindigkeit flexibel auswählen, um das Netzwerk effizient zu erweitern. Sie eignen sich gut für Anwendungen, die einen Uplink zu einem Backbone-Switch und einem Überwachungszentrum über große Entfernungen benötigen.Umweltverträgliches DesignMit seinem IP30-Industriegehäuse aus Metall bietet der IGS-1020PTF ein hohes Maß an Immunität gegen elektromagnetische Störungen und starke Stromstöße, wie sie in der Regel in Fabrikhallen oder in Verkehrssteuerungsschränken ohne Klimaanlage auftreten. Er verfügt über eine belüftete Konstruktion, bei der kein Lüfter erforderlich ist, wodurch sein Betrieb geräuschlos ist. Der IGS-1020PTF kann in einem Temperaturbereich von -40 bis 75 Grad Celsius betrieben werden und lässt sich daher in fast jeder schwierigen Umgebung einsetzen.Robuster SchutzDer IGS-1020PTF bietet eine Kontaktentladung von +/-6KV DC und eine Luftentladung von +/-6KV DC für den Ethernet-ESD-Schutz. Es unterstützt auch +/-6KV Überspannungsfestigkeit, um die Produktstabilität zu verbessern und die Netzwerke der Benutzer vor verheerenden ESD-Angriffen zu schützen und sicherzustellen, dass der Betriebsfluss nicht schwankt.Intelligente LED-Anzeige für PoE-Nutzung in EchtzeitDer IGS-1020PTF hilft den Benutzern, den aktuellen Status der PoE-Leistungsnutzung einfach und effizient durch seine fortschrittliche LED-Anzeige zu überwachen. Auf der Vorderseite des Industrial Gigabit PoE+ Switches befinden sich vier orangefarbene LEDs, die 60W, 120W, 180W und 240W des PoE-Stromverbrauchs anzeigen.Flexible und einfache Installation bei begrenztem PlatzangebotDer IGS-1020PTF ist für die Installation in verschiedenen Umgebungen, wie z. B. Wandschränken, konzipiert. Er kann fest an der Wand, auf einer DIN-Schiene oder seitlich an der Wand montiert werden, was seine Verwendung an jedem Ort mit begrenztem Platzangebot flexibler und einfacher macht.

Planet 8-Port 10/100/1000/2500T+ 1-Port 10G SFP+ Multigigabit 1 GbpsProduktbeschreibung:PLANET 8-Port 10/100/1000/2500T +. Switch-Typ: Unmanaged. Basic Switching RJ-45 Ethernet Ports-Typ: 2.5G Ethernet (100/1000/2500) - Anzahl der basisschaltenden RJ-45 Ethernet Ports: 8 - Anzahl installierte SFP Module: 1. MAC-Adressentabelle: 4000 Eintragungen - Routing-/Switching-Kapazität: 60 Gbit/s. Netzstandard: IEEE 802.3 - IEEE 802.3ab - IEEE 802.3ae - IEEE 802.3az - IEEE 802.3bz - IEEE 802.3u - IEEE 802.3x. Rack-EinbauTechnische Details:AllgemeinesTypSwitchDiverse Produktfeatures (Wasserdicht, Lautstärkeregler, ...)UnmanagedBauformRack-ModulSchnittstellen/KonnektivitätPortzahl8-PortNetzwerkNetzwerkstandardsEthernetNetzwerkportsRJ-45Technische DatenÜbertragungsrate1 GbpsRack Höheneinheiten3 HESonstiges / ZubehörKennzeichnungCE; FCC

Planet RS232/RS-422/RS485 to Ethernet 1-Port TCP/IP RS-423 RS-485 RS-232Produktbeschreibung:1x DB9 interface supports RS232, 2-wire RS485, 4-wire RS485 and RS422 operation Asynchronous serial data rates up to 921600bps Data mode includes VCOM, RFC2217, TCP Server, TCP Client, UDP, Remote Pair, Modbus converter server / client and Serial Telnet modes    Ethernet Interface: 1x 10/100BASE-TX RJ45 interface with auto MDI/MDI-X function   Management: IPv4 and IPv6 dual stack management Remote Management Interfaces IP-based Web management Telnet console management Windows-based VCOM utility supports searching, monitoring and configuration setting IP NTP (Network Time Protocol)  Standard TCP/IP interface and versatile operation modes Software Protocol supports ICMP, TCP/IP, UDP, HTTP server, DHCP client, Telnet server/client  Serial Operation mode selected via management interface Pair Connection mode for connecting two serial devices over a network Allows a maximum of 4 hosts to be accessed as TCP client mode Firmware upgrade via HTTP protocol Accessible IP security control to prevent illegal users Event notification Remote syslog server SNMP trap DHCP client for IP address assignment  PLANET Smart Discovery utility automatically finds the client devices on the netw  Case and Installation: Compact size for easy Installation Standalone -- Wall mountable or DIN-rail mounting (optional accessory) Co-works with PLANET MC family Media Chassis (MC-700/1500) External power adaptor 5V DC, 2A max. Supports 6000 VDC Ethernet ESD protection -10 to 60 degrees C operating temperature Supports extensive LED indicators for network diagnosis Reset button for resetting to factory default Cost-effective Solution for RS232/422/485 Serial-to-Ethernet Application:PLANET ICS-110 Serial Device Server is specially designed to convert RS232, RS422 or RS485 serial communication to Fast Ethernet networking to extend the network distance efficiently and inexpensively.  There is one 10/100BASE-TX RJ45 port in the ICS-110 and its operating temperature ranges from -10 to 60 degrees C for your network needs. The ICS-110 is a time-saving and cost-effective solution for users and system integrators to quickly transform their serial devices into the Ethernet network with no need of replacing the existing serial devices and software system. Remote Management:As the ICS-110 provides an easy serial-to-Ethernet connectivity and connection to a TCP/IP network, the remote network system can thus be managed efficiently via its Web, telnet and VCOM management interfaces. It supports both application and serial operation modes for alarm or IP address connection, which saves the network administrator’s time in detecting and locating network problems without visual inspection of the cabling and devices.  Multiple connection options are available for large networking environment as well. Easy Chassis Installation:The ICS-110 can be used as a stand-alone unit or a slide-in module to PLANET Media Converter Chassis (MC-700 and MC-1500 chassis). The media chassis can assist in providing DC power to the ICS-110 and can be DIN-rail or wall mounted for efficient use of cabinet space, without the need of replacing the existing serial equipment and software system.Technische Details:AllgemeinesTypConverterDiverse Produktfeatures (Wasserdicht, Lautstärkeregler, ...)Managed; Stand-AloneSchnittstellen/KonnektivitätPortzahl1-PortUniverselle SchnittstellenRS-423; RS-485; RS-232NetzwerkNetzwerkprotokolleTCP/IPNetzwerkstandardsEthernetNetzwerkportsRS-423; RS-485; RS-232Technische DatenÜbertragungsrate0,1 GbpsNetzwerk/Telefon-ZusatzfunktionenMDI Port-ErkennungAbmessungen / GewichtAbmessungen97 x 70 x 26 mm

Planet Digitus RJ45-Stecker f.Feldanwendungen CAT 6A Stecker für Feldmontage ungeschirmtTechnische Details:AllgemeinesTypSonstiges NetzwerkgerätNetzwerkNetzwerkportsRJ-45

Der PLANET GS-4210-24T4S ist ein zuverlässiger Gigabit-Ethernet-Switch für effizientes Netzwerkmanagement und nahtlose Konnektivität. Mit Unterstützung für bis zu 256 VLANs und insgesamt 28 Ports, darunter 24 10/100/1000 Mbit/s-Ports und 4 SFP-Steckplätze, ist dieser Switch in der Lage, mehrere Geräte und einen hohen Datendurchsatz zu verarbeiten. Darüber hinaus bietet er Funktionen wie die Unterstützung von Jumbo Frames und umfassende Sicherheitsprotokolle, die eine stabile und sichere Netzwerkumgebung gewährleisten. Mit einem breiten Temperaturbereich von 0 °C bis 50 °C und einem robusten Metallgehäuse kann dieser Switch verschiedenen Umweltfaktoren standhalten und eignet sich daher sowohl für Desktop- als auch für Rack-Installationen. Dank der Fernverwaltungsfunktionen mit Protokollen wie SNMP und SSH-2 können Netzwerkadministratoren die Leistung problemlos überwachen, Konfigurationen verwalten und die Effizienz des Netzwerks von praktisch überall aus aufrechterhalten.Robuste KonnektivitätsoptionenMit 24 Ethernet-Ports und 4 SFP-Steckplätzen eignet sich der GS-4210-24T4S für verschiedene Netzwerkkonfigurationen und bietet Flexibilität für zukünftige Erweiterungen.Erweiterte NetzwerkverwaltungAusgestattet mit SNMP- und RMON-Unterstützung ermöglicht dieser Switch eine detaillierte Überwachung und Verwaltung der Netzwerkleistung und gewährleistet einen reibungslosen Betrieb.Effektive SicherheitsprotokolleDurch die Integration von RADIUS- und TACACS+-Authentifizierungsmethoden sowie weiteren Funktionen hilft dieser Switch, den unbefugten Zugriff auf das Netzwerk zu verhindern.Leistungsstarkes SwitchingMit einer Switching-Fabric-Bandbreite von 56 Gbit/s und einem Durchsatz von 41,67 Mpps ist der GS-4210-24T4S in der Lage, große Mengen an Datenverkehr effizient zu verwalten.Widerstandsfähigkeit gegenüber UmwelteinflüssenDieser Switch ist für den Betrieb bei Temperaturen zwischen 0 °C und 50 °C ausgelegt und in einem robusten Metallgehäuse untergebracht, so dass er unter verschiedenen Bedingungen zuverlässig funktioniert.

Planet Gigabit-Industrieswitch 4 Port PoE 2 SFP Switch Kupferdraht 1 Gbps 4-Port TCP/IP Ethernet Power over RJ-45 3 HEProduktbeschreibung:4-port 10/100/1000Base-T RJ-45 with IEEE 802.3af / 802.3at PoE Injector 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Power over Ethernet Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet Plus End-Span PSE Up to 4 IEEE 802.3af / 802.3at devices powered   Supports PoE Power up to 30.8 watts for each PoE port Provides DC 52V power over RJ-45 Ethernet cable to PD with Ethernet port Auto-detects EEE 802.3af/at equipment and protects devices from being damaged by incorrect installation Remote power feeding up to 100m Layer 2 Features Supports Auto-Negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame flow control (full-duplex) Automatic address learning and address aging Industrial Case / Installation IP30 aluminum metal case protection Dual SFP Ports Auto Link Redundant Mode Support DIN Rail and Wall Mount Design 48V DC redundant power with polarity reverse protect function and removable terminal block for master and slave power Supports EFT protection 6000 VDC for power line Supports 6000 VDC Ethernet ESD protection -40 to 75 degrees C operating temperature   Long Distance High Power PoE and Gigabit Data Extension Solution The PLANET IGS-624HPT is an Industrial Gigabit 802.3at PoE+ Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It provides 4-port 10/100/1000Base-T copper with 802.3af/at PoE injector and 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-624HPT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.   High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications, the IGS-624HPT provides 4 10/100/1000Mbps ports featuring both IEEE 802.3af and IEEE 802.3at Power over Ethernet Plus (PoE+) that combine up to 30-watt of power output and data per port over one Cat.5E / 6 Ethernet cable. With totally 120-watt PoE output capability on the whole system, the IGS-624HPT is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) outdoor wireless LAN access points and other PoE network devices by providing double PoE power, rather than the current conventional 802.3af PoE.    Intelligent LED Indicator for Real-time PoE Usage The IGS-624HPT helps users to monitor current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the Industrial Gigabit PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.    Convenient and Reliable Power System To facilitate the 802.3at High Power PoE usage with the commonly used 48V DC power input in transportation and industrial-level applications, the IGS-624HPT adopts 48V DC to 52V DC power boost technology to solve power source issue which is not required for special power supplies to achieve the level of High Power PoE+ output. To enhance the operation reliability and flexibility, the IGS-624HPT is equipped with two DC power input connectors for redundant power supply installation.      High Power Budget for PoE Extension With 30-watt PoE output capability, the IGS-624HPT can extend much longer distance by using PLANET PoE Extender for powering up the IEEE 802.3af PoE PD devices which can be installed over more than 100 meters away. By daisy-chaining multiple PLANET PoE Extenders, it offers the great flexibility of doubling, tripling or quadrupling the distance of PoE network.    Environmentally Hardened Design The IGS-624HPT is equipped with the rugged IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-624HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-624HPT can be placed in almost any difficult environment. The IGS-624HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.   Fiber-Optical Link Capability Extend the Range of Network Deployment The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (Multi-Mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber or WDM fiber).      Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode Via the built-in DIP switch, the IGS-624HPT can be configured as 6-port Ethernet switch or 4+2 fiber redundant mode. With the 6-port switch mode, the IGS-624HPT can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 4+2 fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link down, it will forward the packet to the other port of the backup pair.Technische Details:AllgemeinGerätetypSwitch - 6 AnschlüsseGehäusetypAn DIN-Schiene montierbar, wandmontierbarUntertypGigabit EthernetPorts4 x 10/100/1000 (PoE+) + 2 x Gigabit SFPPower Over Ethernet (PoE)PoE+PoE-Budget120 WLeistungSwitching Fabric-Bandbreite: 12 Gbit/s Durchsatz (64-Byte Paketgröße): 8,93 MppsGröße der MAC-Adresstabelle1000 EinträgeLeistungsmerkmaleFlusskontrolle, Vollduplex-fähig, Auto-Negotiation, Auto-Uplink (Auto MDI/MDI-X), Store-and-Forward, Halbduplex-Modus, Vollduplex-Modus, 6KV ESD Protector, 6KV EFT SchutzProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.3atStatusanzeigerPort Status, Stromversorgung, PoE, Link/AktivitätErweiterung/KonnektivitätSchnittstellen4 x 1000Base-T RJ-45 PoE+ - 30.8 WStromversorgungStromversorgungsgerätInternes NetzteilRedundante StromversorgungJaErforderliche NetzspannungDC 48 VVerschiedenesProduktzertifizierungenIEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, FCC Part 15 A, IP30Maße und GewichtBreite15,2 cmTiefe10,7 cmHöhe7,2 cmGewicht1,539 kgUmgebungsbedingungenMin Betriebstemperatur-40 °CMax. Betriebstemperatur75 °CZulässige Luftfeuchtigkeit im Betrieb5 - 95 % (nicht kondensierend)Min. Lagertemperatur-40 °CMax. Lagertemperatur75 °CZulässige Luftfeuchtigkeit bei Lagerung5 - 95 % (nicht kondensierend)

Planet Switch managed 24 x 10/100/1000 PoE+ + 4 x Kombi-Gigabit-SFP Desktop an Rack montierbar 220 WProduktbeschreibung:28-port 10/100/1000BASE-T Gigabit RJ45 copper with 24-port IEEE 802.3at/af PoE injector 4x 100/1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-28 compatible with 100BASE-FX SFP RJ45 console interface for switch basic management and setup Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE Backward compatible with IEEE 802.3af Power over Ethernet Up to 24 ports of IEEE 802.3af / 802.3at devices powered Supports PoE power up to 30.8 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100 meters PoE management - Total PoE power budget control - Per port PoE function enable/disable - PoE Port power feeding priority - Per PoE port power limitation - PD classification detection - PD alive-check - PoE schedule Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN - IEEE 802.1Q tagged VLAN - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) - Protocol VLAN - Voice VLAN - Private VLAN - Management VLAN - GVRP Supports Spanning Tree Protocol - STP (Spanning Tree Protocol) - RSTP (Rapid Spanning Tree Protocol) - MSTP (Multiple Spanning Tree Protocol) - STP BPDU Guard, BPDU filtering and BPDU forwarding Supports Link Aggregation - IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Ingress and egress rate limit per port bandwidth control Storm control support - Broadcast / Unknown unicast / Unknown multicast Traffic classification - IEEE 802.1p CoS - TOS / DSCP / IP precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Authentication - IEEE 802.1X port-based network access authentication - Built-in RADIUS client to co-operate with the RADIUS servers - RADIUS / TACACS+ login user access authentication Access control list - IPv4 / IPv6 IP-based ACL - MAC-based ACL MAC security Static MAC MAC filtering Port security for source MAC address entries filtering DHCP snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP source guard prevents IP spoofing attacks DoS attack prevention SSH/SSL IPv4 and IPv6 dual stack management Switch management interface - Web switch management - Telnet command line interface - SNMP v1, v2c and v3 - SSH and SSL secure access User privilege levels control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System maintenance - Firmware upload/download via HTTP / TFTP - Configuration upload / download through web interface - Dual images - Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Cable diagnostics Link Layer Discovery Protocol (LLDP) and LLDP-MED SNMP trap for interface link up and link down notification Event message logging to remote Syslog server Four RMON groups (history, statistics, alarms and events) PLANET smart discovery utility Smart fan with speed control      A Perfect Managed PoE+ Switch with Advanced L2/L4 Switching and Security The GS-4210-24P(L)4C is a new generation of PLANET managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 24 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit TP/SFP combo ports. With a total power budget of up to 220 watts and 440 watts for different kinds of PoE applications, respectively, the GS-4210-24P4C and GS-4210-24PL4C provide a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.    Built-in Unique PoE Functions for Powered Devices Management As a managed PoE switch for surveillance, wireless and VoIP networks, the GS-4210-24P(L)4C features special PoE management functions: PD alive check Scheduled power recycling PoE schedule PoE usage monitoring   Intelligent Powered Device Alive-Check The GS-4210-24P(L)4C can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-24P(L)4C will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.   Scheduled Power Recycling The GS-4210-24P(L)4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.   PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-24P(L)4C can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.    PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-24P(L)4C enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.   Smart Fan Design for Silent Operation The GS-4210-24P(L)4C features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-24P(L)4C is able to operate reliably, stably and quietly in any environment without affecting its performance.   IPv6 / IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the GS-4210-24P(L)4C helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.   Robust Layer 2 Features The GS-4210-24P(L)4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24P(L)4C allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.    Efficient Traffic Control The GS-4210-24P(L)4C is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.   Powerful Security PLANET GS-4210-24P(L)4C offers comprehensive IPv4 / IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port.   Advanced Network Security The GS-4210-24P(L)4C also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.   Friendly and Secure Management For efficient management, the GS-4210-24P(L)4C is equipped with console, web, telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-24P(L)4C offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via telnet and the console port. Moreover, the GS-4210-24P(L)4C offers secure remote management by supporting SSH, SSL and SNMPv3 connections which encrypt the packet content at each session.   Flexibility and Long-distance Extension Solution The GS-4210-24P(L)4C provides 4 extra gigabit TP interfaces supporting 10/100/1000BASE-T RJ45 copper that connects with surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also connect with the 100BASE-FX / 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The GS-4210-24P(L)4C supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.Technische Details:AllgemeinGerätetypSwitch - 24 Anschlüsse - managedGehäusetypDesktop, an Rack montierbar 1UUntertypGigabit EthernetPorts24 x 10/100/1000 (PoE+) + 4 x Kombi-Gigabit-SFPPower Over Ethernet (PoE)PoE+PoE-Budget220 WLeistungSwitching Fabric-Bandbreite: 56 Gbit/s Durchsatz: 41,67 MppsKapazitätVLAN-Gruppen: 256 VLAN-Unterstützung: 4094Größe der MAC-Adresstabelle8000 EinträgeJumbo-Rahmenunterstützung10KBRouting ProtocolIGMPv2, IGMPv3, MLDv2, MLDRemoteverwaltungsprotokollSNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSHVerschlüsselungsalgorithmusSSLAuthentifizierungsmethodeRADIUS, TACACS+LeistungsmerkmaleFlusskontrolle, Layer 4 switching, Layer 2 switching, DHCP Support, Power over Ethernet (PoE), BOOTP-Unterstützung, VLAN-Unterstützung, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, Syslog-Unterstützung, Schutz vor DoS-Angriffen, Port-Spiegelung, verwaltbar, Store-and-Forward, MAC-Adressenfilter, Broadcast Storm Control, IPv6-Unterstützung, Halbduplex-Modus, Vollduplex-Modus, Multicast Storm Control, Unicast Storm Control, Firmware aktualisierbar, SNTP-Unterstützung, Spanning Tree Protocol (STP) Support, unterstützt Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree Protocol (MSTP) Support, DHCP-Snooping, Access Control List (ACL) Support, Quality of Service (QoS), RADIUS-Unterstützung, SSH-Unterstützung, Jumbo-Frames-Support, MLD-Snooping, Dynamic ARP Inspection (DAI), Digital Diagnostics, Reset-Taste, Bandbreitensteuerung, IPv4-Unterstützung, LLDP-Support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), Class of Service (CoS), Generic VLAN Registration Protocol (GVRP), TFTP-Client, 8KV ESD Protector, Type of Service (ToS), unterstützt DiffServ Code Point (DSCP), 4,1-MB-Paketpuffer, IP-Quellwächter, Bridge protocol data unit (BPDU)ProduktzertifizierungenIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3atIntegrierte PeripheriegeräteLED PanelStatusanzeigerStromversorgung, Alarm, System, 1000M-Gerät angeschlossen, PoE, Link/Aktivität, LüfterErweiterung/KonnektivitätSchnittstellen8 x 1000Base-T RJ-45 PoE+ - 30.8 W 4 x 1000Base-X SFP 4 x 1000Base-T RJ-45 1 x Verwaltung (RS-232) RJ-45StromversorgungStromversorgungsgerätInternes NetzteilErforderliche NetzspannungWechselstrom 120/230 V (50/60 Hz)Leistungsaufnahme im Betrieb275 WattVerschiedenesZubehör im LieferumfangGummifüße, 4 Port-Abdeckungen (SFP)Enthaltene Kabel1 x KonsolenkabelRackmontagesatzMitgeliefertProduktzertifizierungenFCC Part 15 AMaße und GewichtBreite44 cmTiefe30 cmHöhe4,45 cmGewicht4,214 kgUmgebungsbedingungenMin Betriebstemperatur0 °CMax. Betriebstemperatur50 °CZulässige Luftfeuchtigkeit im Betrieb5 - 95 % (nicht kondensierend)Min. Lagertemperatur-20 °CMax. Lagertemperatur70 °CZulässige Luftfeuchtigkeit bei Lagerung5 - 95 % (nicht kondensierend)