Planet Switch L3 managed 16 x 10/100/1000 PoE+ + 2 x + 2 x SFP an DIN-Schiene montierbar wandmontierbar 320 W Gleichstrom

Planet Switch L3 managed 16 x 10/100/1000 PoE+ + 2 x + 2 x SFP an DIN-Schiene montierbar wandmontierbar 320 W Gleichstrom

Produktbeschreibung:

16x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
with IEEE 802.3at PoE+ Injector 2x 10/100/1000BASE-T
Gigabit Ethernet RJ45 ports 2x 100/1000BASE-X
mini-GBIC/SFP slots for SFP type auto detection
One RJ45 console interface for basic management
and setup   Power over Ethernet Complies with
IEEE 802.3at Power over Ethernet Plus/end-span
PSE Up to 16 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE
port Auto detects powered device (PD) Circuit
protection prevents power interference between
ports Remote power feeding up to 100m PoE management
features - Total PoE power budget control - Per
port PoE function enable/disable - PoE admin-mode
control - PoE port power feeding priority - Per
PoE port power limit - PD classification detection
Intelligent PoE features - Temperature threshold
control - PoE usage threshold control - PD alive
check - PoE schedule   Industrial Case & Installation
IP30 aluminum case protection DIN rail and wall-mount
design 48~56V DC,
redundant power with polarity reverse protect
function Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature   Digital
Input & Digital Output 2 Digital Input (DI) 2
Digital Output (DO) Integrate sensors into auto
alarm system Transfer alarm to IP network via
email and SNMP trap   Layer 2 Features Prevents
packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture,
and runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth Storm Control
support - Broadcast/Multicast/Unicast Supports
VLAN - IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups,
out of 4094 VLAN IDs - Provider Bridging (VLAN
Q-in-Q) support (IEEE 802.1ad) - Private VLAN
Edge (PVE) - Protocol-based VLAN - MAC-based VLAN
- Voice VLAN Supports Spanning Tree Protocol -
IEEE 802.1D Spanning Tree Protocol (STP) - IEEE
802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE
802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN - BPDU Guard Supports Link
Aggregation - 802.3ad Link Aggregation Control
Protocol (LACP) - Cisco ether-channel (static
trunk) - Maximum 10 trunk groups with 4 ports
per trunk group - Up to 8Gbps bandwidth (duplex
mode) Provides port mirror (1-to-1) Port mirroring
to monitor the incoming or outgoing traffic on
a particular port Loop protection to avoid broadcast
loops Supports ERPS (Ethernet Ring Protection
Switching)   Layer 3 IP Routing Features Supports
maximum 32 software static routes and route summarization
  Quality of Service Ingress Shaper and Egress
Rate Limit per port bandwidth control 8 priority
queues on all switch ports Traffic classification
- IEEE 802.1p CoS - IP TOS/DSCP/IP precedence
- IP TCP/UDP port number - Typical network application
Strict priority and Weighted Round Robin (WRR)
CoS policies Supports QoS and In/Out bandwidth
control on each port Traffic-policing policies
on the switch port DSCP remarking   Multicast
Supports IGMP snooping v1,
v2 and v3 Supports MLD snooping v1 and v2 Querier
mode support IGMP snooping port filtering MLD
snooping port filtering MVR (Multicast VLAN Registration)
  Security IEEE 802.1x Port-based/MAC-based network
access authentication Built-in RADIUS client to
cooperate with the RADIUS servers TACACS+ login
users access authentication RADIUS/TACACS+ users
access authentication IP-based Access Control
List (ACL) MAC-based Access Control List Source
MAC/IP address binding DHCP snooping to filter
distrusted DHCP messages Dynamic ARP Inspection
discards ARP packets with invalid MAC address
to IP address binding IP Source Guard prevents
IP spoofing attacks IP address access management
to prevent unauthorized intruder   Management
Switch Management Interfaces - Console/Telnet
Command Line Interface - Web switch management
- SNMP v1 and v2c switch management - SSH/SSL
and SNMP v3 secure access Four RMON groups (history,
statistics, alarms, and events) IPv6 IP address/NTP/DNS
management Built-in Trivial File Transfer Protocol
(TFTP) client BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP/TFTP DHCP Relay
DHCP Option 82 User Privilege levels control Network
Time Protocol (NTP) Link Layer Discovery Protocol
(LLDP) SFP-DDM (Digital Diagnostic Monitor) Cable
diagnostic technology provides the mechanism to
detect and report potential cabling issues Reset
button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deployment
management     Environmentally Hardened Design
PLANET Industrial 16-Port Gigabit 802.3at PoE+ Switch,
IGS-20160HPT, is equipped with rugged IP30 metal
case for stable operation in heavy Industrial
demanding environments.
With IP30 industrial case protection, the IGS-20160HPT
provides a high level of immunity against electromagnetic
interference and heavy electrical surges which
are usually found on plant floors or in curbside
traffic control cabinets.
Being able to operate under wide temperature range
from -40 to 75 degrees C,
the IGS-20160HPT can be placed in almost any difficult environment.
The IGS-20160HPT also allows either DIN rail or
wall mounting for efficient use of cabinet space.
   Redundant Ring, Fast Recovery for Surveillance
System The IGS-20160HPT supports redundant ring
technology and features strong rapid self-recovery
capability to prevent interruptions and external intrusions.
It incorporates advanced Redundant Ring technology,
Spanning Tree Protocol (802.1w RSTP), and redundant
power supply system into customer’s industrial
automation network to enhance system reliability
and uptime in harsh factory environments.
The IGS-20160HPT also protects customer’s industrial
network connectivity with switching recovery capability
that is used for implementing fault tolerant ring
and mesh network architectures.
If the Industrial network was interrupted accidentally,
the fault recovery times could be less than 50ms
to quickly bring the network back to normal operation.
   High Power PoE for Security and Public Service
Applications To fulfill the demand of High Power
PoE for network applications with Gigabit speed
transmission under wide temperature,
the IGS-20160HPT provides 16 10/100/1000Mbps ports
featuring IEEE 802.3at Power over Ethernet Plus
(PoE+) that combines up to 36-watt power output
and data per port over one Cat.5E/6 Ethernet cable.
With a total 320-watt PoE budget on the whole system,
the IGS-20160HPT is designed specifically to satisfy
the growing demand of higher power consuming network
PDs (powered devices) such as PTZ (Pan,
Tilt & Zoom)/Speed Dome network cameras, multi-channel
(802.11a/b/g/n) wireless LAN access points and
other PoE network devices by providing PoE power,
doubling that of the current conventional 802.3af PoE.
   Intelligent Alive Check for Powered Device
The IGS-20160HPT PoE Switch can be configured
to monitor connected PD’s status in real time
via ping action.
Once the PD stops working and responding, the
IGS-20160HPT will recycle the PoE port power and
bring the PD back to work.
It also greatly enhances the reliability in that
the PoE port will reset the PD power,
thus reducing administrator’s management burden.
   PoE Schedule for Energy Saving Under the trend
of energy saving worldwide and contributing to
environmental protection on the Earth,
the IGS-20160HPT can effectively control the power
supply besides its capability of giving high watts power.
The built-in “PoE schedule” function helps you
to enable or disable PoE power feeding for each
PoE port during specified time intervals and it
is a powerful function to help SMBs or enterprises
save power and money.
   Digital Input and Digital Output for External
Alarm The IGS-20160HPT supports Digital Input
and Digital Output on its front panel.
This external alarm enables users to use Digital
Input to detect and log external device status
(such as door intrusion detector),
and send event alarm to the administrators. The
Digital Output could be used to alarm the administrators
if the IGS-20160HPT port shows link down,
link up or power failure.    Layer 3 IPv4 and
IPv6 Software VLAN Routing for Secure and Flexible
Management To help customers stay on top of their businesses,
the IGS-20160HPT not only provides ultra high
transmission performance and excellent Layer 2 technologies,
but also IPv4/IPv6 software VLAN routing feature
which allows to crossover different VLANs and
different IP addresses for the purpose of having
a highly secured,
flexible management and simpler networking application.
  Robust Layer 2 Features The IGS-20160HPT can
be programmed for advanced switch management functions
such as dynamic port link aggregation,
Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol,
Layer 2 to Layer 4 QoS, bandwidth control and
IGMP snooping.
The IGS-20160HPT provides 802.1Q tagged VLAN,
and the VLAN groups allowed will be maximally up to 255.
Via aggregation of supporting ports, the IGS-20160HPT
allows the operation of a high-speed trunk combining
multiple ports.
It enables a maximum of up to 10 trunk groups
with 4 ports per trunk group,
and supports fail-over as well.   Efficient Management
For efficient management,
the IGS-20160HPT Managed Ethernet Switch is equipped with console,
Web and SNMP management interfaces. With the built-in
Web-based management interface,
the IGS-20160HPT offers an easy-to-use, platform-independent
management and configuration facility.
For text-based management, the IGS-20160HPT can
be accessed via Telnet and the console port.
Moreover, it also offers secure remote management
via any standard-based management software by
supporting SNMP v3 connection which encrypts the
packet content at each session.
   Powerful Security The IGS-20160HPT offers comprehensive
Layer 2 to Layer 4 Access Control List (ACL) for
enforcing security to the edge.
It can be used to restrict network access by denying
packets based on source and destination IP address,
TCP/UDP ports or defined typical network applications.
Its protection mechanism also comprises 802.1x
Port-based and MAC-based user and device authentication.
With the private VLAN function, communication
between edge ports can be prevented to ensure user privacy.
The network administrators can now construct highly-secured
corporate networks with considerably less time
and effort than before.
  Flexibility and Extension Solution The two mini-GBIC
slots built in the IGS-20160HPT support dual speed,
100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor
Pluggable) fiber-optic modules,
meaning the administrator now can flexibly choose
the suitable SFP transceiver according to not
only the transmission distance but also the transmission
speed required.
The distance can be extended from 550 meters (multi-mode
fiber) to 10/50/70/120 kilometers (single-mode
fiber or WDM fiber).
They are well suited for applications within the
enterprise data centers and distributions.
   Perfect Integration Solution for Outdoor IP
PoE Camera and NVR System The IGS-20160HPT provides
16 10/100/1000Mbps 802.3at PoE+ ports and can
offer sufficient PoE power to 16 PoE IP cameras
at the same time.
In addition, with the 2 100/1000BASE-X SFP interfaces,
the IGS-20160HPT can connect to core fiber switch
and send video stream to NVR and monitoring center.
Through the high-performance switch architecture,
the IGS-20160HPT facilitates the recorded video
files from the 16 PoE IP cameras to be saved in
the NVR systems.
Furthermore, the NVR systems can be controlled
and monitored both in the local LAN and the remote
site via Internet.
The IGS-20160HPT undoubtedly brings an ideal secure
surveillance system at a lower total cost.

Technische Details: